THE ROLE AND IMPORTANCE OF TRAINING FOR IMPROVING THE SAFETY AND AWARENESS OF THE TECHNICAL STAFF IN THE MINING PLANT
AbstractHarsh working conditions and the introduction of technologically advanced machines are placing growing demands on the qualifications of mine workers, forcing mine workers to undergo continuous training. This article presents the results of research concerning the evaluation of training and expectations of workers in a mining plant to identify further actions in this area. The results indicate that workers negatively evaluate previous training. Based on advanced expert interviews and panel discussions, the directions and recommendations regarding the necessary changes to training are set out. Employees suggest broadening the subject of occupational health and safety training. Their concerns relate to the operation and maintenance of new machines, telecommunication equipment, mining support, ventilation, and interpersonal communication. The results indicate a growing awareness among employees of the role and importance of training and the acceptance of upgrading skills as an investment in the future.
Brodny, J. (2012). Analysis of operation of new construction of the frictional joint with the resistance wedge. Archives of Mining Sciences, 57(1), 209-227.
Brodny, J., Stecuła, K., Tutak, M. (2016). Application of the TPM strategy to analyze the effectiveness of using a set of mining machines. Proceedings of 16th International Multidisciplinary Scientific GeoConferences SGEM 2016, Book 1, Vol. II, Albena Bulgaria, 65-72. DOI: 10.5593/SGEM2016/B12/S03.009.
Brodny, J., Tutak, M. (2016a). Determination of the zone endangered by methane explosion in goaf with caving of operating longwalls. Proceedings of 16th International Multidisciplinary Scientific GeoConferences SGEM 2016, Book 1, Vol. II, Albena Bulgaria, 299-306. DOI: 10.5593/SGEM2016/B12/S03.039.
Brodny, J., Tutak, M. (2016b). The impact of the flow volume flow ventilation to the location of the special hazard spontaneous fire zone in goaf with caving of operating longwalls. Proceedings of 16th International Multidisciplinary Scientific GeoConferences SGEM 2016, Book 1, Vol. II, Albena Bulgaria, 897-904. DOI: 10.5593/SGEM2016/B12/S03.115.
Matuszewski, K. (2009). Przyczyny wypadków przy pracy w górnictwie w aspekcie profilaktyki., Bezpieczeństwo Pracy: nauka i praktyka (2), 22-25.
Ochman, G. (2011). System zarządzania bezpieczeństwem i higieną pracy jako element zintegrowanego systemu zarządzania na przykładzie Kompanii Węglowej S.A., Wybrane problemy inżynierskie (2), 281-286.
Polska Grupa Górnicza. Zintegrowany system zarządzania [online, dostęp: 10.03.17], www.pgg.pl/o-firmie/zsz.
Stecuła, K., Brodny, J. (2016). Application of the OEE model to analyze the availability of the mining armored face conveyor. Proceedings of 16th International Multidisciplinary Scientific GeoConferences SGEM 2016, Book 1, Vol. II, Albena Bulgaria, 57-64. DOI: 10.5593/SGEM2016/B12/S03.008.
Tutak, M., Brodny, J. (2016a). Analysis of gases emitted into the atmosphere during an endogenous fire. Green Extended Scientific Sessions, Proceedings of Conferences in Vienna SGEM 2016, Book 4, Vol3, Vienna Austria, 75-82. DOI: 10.5593/SGEM2016/HB43/S06.011.
Tutak, M., Brodny, J. (2016b). Analysis of methane emission into the atmosphere as a result of mining activity. Green Extended Scientific Sessions, Proceedings of Conferences in Vienna SGEM 2016, Book 4, Vol3, Vienna Austria, 83-90. DOI: 10.5593/SGEM2016/HB43/S06.012.
Wyższy Urząd Górniczy. Statystyki wypadków [online, dostęp: 5.03.17], www.wug.gov.pl/bhp/statystyki_wypadków.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Creative Commons Attribution License 3.0 - CC BY 3.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
firstname.lastname@example.org, www.iseic.cz, ojs.journals.cz