MANUFACTURING AND CONTINUOUS IMPROVEMENT PERFORMANCE LEVEL IN PLANTS OF MEXICO; A COMPARATIVE ANALYSIS AMONG LARGE AND MEDIUM SIZE PLANTS

  • Carlos Monge Universidad Autónoma de Nuevo León, Graduated School in Management & Industrial Engineering, Monterrey
  • Jesús Cruz Universidad Autónoma de Nuevo León, Public Accounting & Management Faculty, Monterrey
Keywords: lean manufacturing, sustainable manufacturing, continuous improvement, operational effectiveness and environmental responsibility

Abstract

A random and statistically significant sample of 40 medium (12) and large (28) manufacturing plants of Apodaca, Mexico were surveyed using a structured and validated questionnaire to investigate the level of implementation of lean manufacturing, sustainable manufacturing, continuous improvement and operational efficiency and environmental responsibility in them, it is important to mention it was found that performance in the mentioned philosophies, on the two categories of plants is low, however large plants show a better performance than medium plants. In both cases, it is worrying that in the highly industrialized municipality of Apodaca,  Mexico are not decisively adopting the philosophies mentioned, as this compromises in a global world, in the medium and long term the viability of the plants, particularly the medium size plants. Finally this article shows the results of the answers to the items of questionnaire for the plants managers, and this can be useful to the management of the plants to identify and to define specific improvement actions towards priority areas.

References

Amin, M.A y Karim, M.A. (2013). A time-based quantitative approach for selecting lean strategies for manufacturing organisations, International Journal of Production Research, 51(4), ISSN: 00207543, 1146-1167

Arrieta , J.G., Botero, V.E. y Romano, M.J. (2010). Benchmarking sobre la manufactura esbelta (lean manufacturing) en el sector de la confección en la ciudad de medellín, Colombia, Journal of Economics, Finance and Administrative Science (en línea), 15(28), ISSN: 2077-1886, 141-170

Austin, D., Saleeshya, P.G. y Vamsi, N. (2013). A model to assess the lean capabilities of automotive industries, International Journal of Productivity and Quality Management, 11(2), ISSN: 1746-6482, 195

Bergmiller, G.G. y Mc.Cright, P.R. (2011). Lean and sustainability programs: Evidence of operational synergy for lean manufacturers and logical growth toward sustainability, Review of Business Research, 11(5), ISSN: 1546-2609, 58-68

Cardozo, E.R, Rodríguez, C. y Guaita, W. (2011). Las pequeñas y medianas empresas agroalimentarias en Venezuela y el desarrollo sustentable: Enfoque basado en los principios de la manufactura esbelta. Información Tecnológica (en línea), 22(5), ISSN: 0718-0764, 39-48

Cooper, R. y Maskell, B. (2008), How to manage through worse-before better, MIT Sloan Managemet Review, summer 2008, Vol. 49, No. 4, ISSN: 1532-9194, pp. 58-65

Cruz, J. & Monge, C. (2015). Manufacturing excellence approach to business performance model, European Journal of Business and Economics, 10(1), ISSN: 1804-5839

EPA. (2000). Pursuing perfection: Cases studies examining lean manufacturing strategies, pollution prevention and environmental regulatory management implications,1-22, EPA Environmental Protection Agency, USA, http: www.epa.gov, acceso: 10 de Julio (2011)

Ferdousi, F y Ahmed. A. (2009). An investigation of Manufacturing Performance through Lean Production: A Study on Bangladeshi Garment Firms, International Journal of Business and Management, (4)/9, ISSN: 1833-8119, pp. 106-116

Ghosh, M. (2013). Lean Manufacturing performance in indian manufacturing plants, Journal of Manufacturing Technology Management, 24(1), ISSN: 1741038X, 113-122

Imai, M. (1986). Kaizen: La Clave de la Ventaja Competitiva Japonesa, 1era. Ed, CECSA, DF México

Irastorza, V. y Fernández, X. (2010). Balance nacional de energía y su relación con el inventario nacional de emisiones (en línea), Revista Internacional de Estadística y Geografía México, 1(1), Noviembre, ISSN en trámite, 52-7, acceso: 10 de Marzo de (2013), http://rde.inegi.org.mx/revista_noviembre_2010/

Jiang, Z., Zhang, H y Sutherland, J.W. (2012). Development of an environmental performance assessment method for manufacturing process plans, International Journal of Advanced Manufacturing Technologies (on line), (58), ISSN: 1433-3015, 783-790

Kidwell, M. (2006). Lean manufacturing and the environment. Ignoring the 8th deadly waste leaves money on the table, Association for Manufacturing Excellence Target Magazine, 22(6), 13-18

Koenigsaecker, G. (2009). Leading the Lean Enterprise Transformation, CRC Press, New York, 39-77

KPMG México. (2009). Encuesta: Desarrollo sustentable en México (2009), KPMG Cárdenas Dosal, S.C., México DF, http://kpmg.com.mx, acceso: 5 de Noviembre de (2011), 4-27

Lee, S. (2012). The impact of manufacturing practices on operational performance, Review of business research, 12(5), ISSN: 1546-2609, 184-189

Liker, J y Convis, G. (2011). The toyota way to lean leadership, CRC Press, New York, pp. 1-10

Millar, H.H y Rusell, S. (2011). The adoption of sustainable manufacturing practices in the Caribbean, Business Strategy and the Environment, 20, ISSN: 0964-4733, 512-526

MIT y BCG. (2013). Findings from the 2012 sustainability and innovation global executive study and research report, MIT Sloan Management Review research report, winter, ISSN: 1532-9194, 1-13

MIT y BCG. (2011). Sustainability: The “Embracers” seize the advantage, MIT Sloan Management Review Research Report, winter, ISSN: 1532-9194, 5-22

MIT y BCG. (2009). The business of sustainability, MIT Sloan Management Review, Special Report, ISSN: 1532-9194, 3-14

Monge, C. (2014a). Impacto de la manufactura esbelta, la manufactura sustentable y la mejora continua en la eficiencia operacional y responsabilidad ambiental de las plantas de manufactura de México, tesis doctoral Universidad Autónoma de Nuevo León, México

Monge, C., Cruz, J & López, F. (2014b). Manufacturing and continuous improvement areas using partial least squares path modeling with multiple regression comparison, Proceedings of CBU International Conference on Innovation, Technology Transfer and Education (2014), February 3-5, Prague, Czech Republic, 15-26

Monge, C., Cruz, J. & López, F. (2013). Impacto de la manufactura esbelta, manufactura sustentable y mejora continua en la eficiencia operacional y responsabilidad ambiental en México, Información Tecnológica, 24(4), ISSN: 07168756, pp. 15-31

Murugesan, T.K., Kumar, B.S. y Kumar, M.S, (2012). Competitive advantage of world class manufacturing system (WCMS) – A study of manufacturing companies in south India, European Journal of Social Sciences, 29(2), ISSN: 1450-2267, 295-311

Reyes-Aguilar, P. (2002). Manufactura delgada (lean) y seis sigma en empresas mexicanas: experiencia y reflexiones, Revista Contaduría Pública y Administración México, 205(Abril-Junio), ISSN: 0186-1042, 51-67

Rodríguez, I. (2011). Construya la eficiencia energética, Revista Manufactura Expansión México, Feb (2011), 41-45

Schneider Study, (2011). Execs see energy as business, moral imperative, (en línea), EEUU, Plant Engineering, (2011), 1-2, acceso: 14 de Marzo (2011), http://www.plantengineering.com/single-article/schneider-study-execs-see-energy-as-business-moral-imperative.

Slaper, T.F. (2011). The triple bottom line: What is it and how does it work?, Journal of Indiana University Kelley School of business, spring (2011), ISSN: 0007-6813, 4-8

Spear, S & Bowen. (1999). Decoding the DNA of the Toyota production system, Harvard Business Review, sept-oct, ISSN: 00178012, pp. 95-106

Toussaint. J.S. y Berry, L.L. (2013). The Promise of Lean in health care (on line), Mayo clinic proceedings, 88(1), ISSN: 1942-5546, 72-84

Upadhye, N., Deshmukh, D.G. y Garg, S. (2010). Lean manufacturing for sustainable development, Global Business and Management Research, 2(1), ISSN: 1947-5657, 125-137

Vinodh, S y Dino, J. (2012). Structural equation modeling of lean manufacturing practices, International Journal of Production Research, 50(6), ISSN: 00207543, 1598-1607

Wills, B. (2009a). Green intentions; Creating a green value stream to compete and win, 3-34, CRC Press, New York, USA

Wills, B. (2009b). The Business case for environmental sustainability (green); Achieving rapid returns from the practical integration of lean and green . HPS white paper, 1-6, acceso: 5 de Enero 2009, http://www.leanandgreensummit.com/LGBC.pdf.

Womack, J.P, Jones, D.T y Roos, D. (1990). The machine that changed the world: The story of lean production systems 1st. Ed., Rawson Associates, 11-15, New York, USA, pp. 11-15

Published
2015-12-12
Section
Articles